Shop made saw benches – 1

19/1/2015

While my monster workbench is getting quite close to being finished, I want to start building two saw benches. I need to start preparing the stock as it inevitably takes a lot of time, seeing that I need to laminate bits of crappy wood to make up the boards I need. It pains me to see how those American woodworkers can rock up to a lumberyard and buy perfect boards (of almost any species) in any imaginable dimension, go home and start working on their project. I work for weeks to cobble together strips of wood to make up boards that will be appropriate for the task. I decided to use Tasmanian Blackwood in this particular case, as I have quite a bit of it and I do not like using it for anything else than shop structures.

I looked at heaps of different designs (in the past 6 months or so) to work out what would suite me best. The design I settled on is based on a saw bench in an article entitled “If the tool fits …” by Ron Herman, in the August 2011 issue of Popular Woodworking Magazine.

In the pictures below you can see the rough stock I picked. It is not the best stock at all, but I would rather use the good stuff for other purposes.

IMG_3000IMG_3001IMG_3002IMG_3014

Here I tried to work out what the ideal height should be given my personal Vitruvianisms (I think this might be a new word). It seems that 18½” (47cm) fits my Vitruvian lower leg.

IMG_3044IMG_3045IMG_3046

Arranging the strips for the first two glue-ups.

IMG_3047IMG_3048

As per usual, I used my Festool Domino to ensure that the edges stay flush. The Domino is the only power tool I still enjoy using. It is fairly quiet and generally a joy to use.

IMG_3049

 

9/2/2015

The second batch of stock that was processed.

IMG_3108IMG_3109IMG_3110IMG_3111

This is my woodworking buddy. Her name is Pipsqueack.

IMG_3112

From these pictures you can appreciate the wide range of different colours one can find in Tasmanian Blackwood. These strips were the first to be hand planed on my new bench. The two planes I used feature in the last picture.

IMG_3189IMG_3190IMG_3191

Another round of glue-ups.

IMG_3192

Removing the dried excess glue with my shop made flush plane.

IMG_3195IMG_3196

 

16/2/2015

IMG_3232

 

23/2/2015

Lamination done.

IMG_3306IMG_3307

 

I started preparing the laminated stock this weekend. The first and most arduous task was to get rid of the slight twist in the boards. Once one face was flat I used the electrical planer to flatten the opposite face.

IMG_3317IMG_3318

After flattening one edge, …

IMG_3324IMG_3325

… my shop made panel gauge came in handy to mark out the opposite edge. While doing this, I realised that by flipping round the lids of my sliding tool trays it creates an ideal stop (in conjunction with my planing stop) to do this task. Just another nifty feature of my bench design.

IMG_3319IMG_3321IMG_3322IMG_3323IMG_3326IMG_3327IMG_3328

Yep, I am a “tails first” type of guy … for now anyway. This is my first attempt at multiple dovetails, so my approach might change depending on how it pans out.

IMG_3329IMG_3330IMG_3331IMG_3333IMG_3332IMG_3334

Cleaning out the waste.

IMG_3335IMG_3336IMG_3337IMG_3338

Transferring the tails to mark out the pins. Here you can appreciate how my shop made assembly table assists with this delicate task.

IMG_3339IMG_3340IMG_3341IMG_3342IMG_3343IMG_3344

A first careful fit.

IMG_3345IMG_3346IMG_3347

Also see Part 2 and 3 of this riveting series.