My 18th Century Workbench in progress 28

16/2/2015

This was one of those weekends in the shop were I did not feel I got much done despite working almost 2½ days. I am still busy with the two sliding deadmen for my bench. One of them will double up as a sliding leg vise, a la plate 279 of “L’Art du Menuisier” (pictured below). Mine however, will be on a smaller scale and retains it’s deadman anatomy too. The point being, this is slow and fiddly type work.

roubo240prRouboGermanBench

Cutting the thread for the wooden screw.

IMG_3233IMG_3234

One Assegaai wooden screw being cut. This antique German screw box is frighteningly sharp. It felt like I was cutting custard.

IMG_3235IMG_3236IMG_3237IMG_3238IMG_3239IMG_3240IMG_3241

Here I started working on the leg vise’s jaw.

IMG_3242IMG_3243IMG_3244IMG_3245IMG_3246

Each deadman has a base which slides on top of the bench’s long stretchers. The joinery is a complete overkill (as per usual). It includes, through mortises that were wedged and draw bored. As you might gather from the pictures, I experimented with slow setting epoxy and normal PVA wood glue for the draw pins. The epoxy, which has a consistency similar to vaseline, certainly improves the ease of clobbering them home. I think it has to do with the fact that it acts as a lubricant and also does now lead to immediate swelling of the dowel, which is the case with the water based glue.

IMG_3253IMG_3254IMG_3255IMG_3256

The protruding tenons and wedges were worked flush by passing it over the table saw several times followed by paring. The surfaces which will be in contact with the top of the stretcher were then covered with sealskin.

IMG_3260IMG_3261IMG_3257IMG_3258IMG_3259IMG_3262IMG_3263IMG_3264IMG_3265

I simply do not have the technical vocabulary to describe what I did here. The pictures will have to tell the story.

IMG_3280IMG_3270IMG_3271IMG_3275IMG_3276

Just to be different, I decided to use an eggbeater drill as inspiration for an alternative looking sliding-deaman-leg-vise. With a bit of imagination, you will probably be able to deduct where this is heading.

IMG_3272IMG_3273IMG_3274IMG_3277IMG_3278IMG_3279

This is a very handy idea if one wants to shape and sand small round parts. This piece is destined for the eggbeater-leg-vise-deadman.

IMG_3266IMG_3267IMG_3268IMG_3269

 

OK, one more clue dressed in sealskin.

IMG_3281IMG_3282IMG_3283