Tag Archives: Scraper

Card scraper holder

This is a quick post showing an easy way to store your card scrapers so that they become very accessible. Until I made this high-tech holder my card scrapers were hiding in a leather wallet type of thing. That old saying that goes “out of sight out of mind”, applied and I often forgot that these handy tools would be idea for a particular job.

In the pictures you can see my set of Lie-Nielsen scrapers resting on the leather pouch while dreaming about their new luxurious abode. I took a piece of laminated Asseggai/Witpeer left over from my legvise project and tidied it up somewhat. In order to cut really thin curves to ensure that the scrapers will not wobble too much, I used this as a hand sawing exercise. My Lie-Nielsen carcass saw cuts a very thin curve, which only accepted the thin scrapers not the thicker versions.

IMG_6733IMG_6734

My custom made Tamboti marking knife came in handy to mark out the cuts. (Please see www.jenesaisquoiwoodworking.com/tamboti-and-witels-marking-knives if you want to read the post on how I made the marking knife) I left the rest of the block of wood untouched for now. It might become the home of scrapers of different shapes that I still plan to make once I find a suitable piece of steel, like an old saw blade.

IMG_6735IMG_6736

You can see how I practiced the skill of sawing to a line using a benchhook.

IMG_6737IMG_6738IMG_6739

The results for all to see. It is certainly not perfect but good enough for this purpose and gave me a bit of practice.

IMG_6740IMG_6741IMG_6742

As usual the product was finished off with some Ballistol and Bob’s your Uncle.

IMG_6743IMG_6745