Mallet facelift

17/11/2014

A week ago I damaged the non-leathered end of my shop made heavy dead-blow mallet, while getting carried away with hitting some Assegaai dowels (draw pins) home. It needed quite a bit of persuasion and I did not realise how hard those dowels are. Anyway, so I drilled out the damaged area and filled it with slow setting epoxy. I will report back on this post how it worked out after some abuse in the shop.

IMG_2677IMG_2678IMG_2679IMG_2680IMG_2681

Thanks for commenting on Je ne sais quoi Woodworking